Changzhou Shinma Drying Engineering Co.,LTD.
Changzhou Shinma Drying Engineering Co.,LTD.
Add to Cart
Product Characteristics:
1. Under the condition of vacuum,the boiling point of raw material will decrease and make the evaporation efficiency increase. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
2. The heat source for evaporation may be low pressure steam or surplus heat steam.
3. The heat loss is less.
4.Before drying,the treatment of disinfection may be carried out during the period of drying,there is no impurity material mixed. It is in conformity.
5. It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
| No | Item | Data(choose as model FZG-20) |
| 1 | Inner size of drying chamber | 1500*1800*1220 |
| 2 | Outer size of drying chamber | 1924*2500*1513 |
| 3 | Layers of backing support | 12 |
| 4 | No.of tray | 48 |
| 5 | Operating temperature of backing support | 35-150 |
| 6 | Vacuum degree inside the chamber when operation in box(Mpa) | -0.1 |
| 7 | Model and power of vacuum pump when condenser is used(kw) | 2x-90A 7.5kw |
| 8 | Model and power of vacuum pump when condenser is not used(kw) | SZ-2 5.5kw |
| 9 | Weight of drying chamber(kg) | 3200 |
