Changzhou Shinma Drying Engineering Co.,LTD.
Changzhou Shinma Drying Engineering Co.,LTD.
Add to Cart
XSG Model Industrial Dryer Spin Flash Dryer
XSG Spin Flash Dryer Description
XSG Spin Flash Dryer is widely used for drying materials such as paste, cake shape, powder, granules material, etc. It is a new type high drying efficiency and low energy consumption equipment that researched and developed by our company.
Hot air enters the stirring part of drying chamber from the bottom, material is stirred by stirring device and then the hot air exerts strong shearing, blowing, floating and rotating effect to material. Therefore material is crushed by centrifugal, shearing, impacting and friction effect. It strengthens the heat exchanging process. In the bottom of drying chamber, big and damp granules are crushed by stirring device, the particles with low moisture content and small size are lifted by rotary air stream, and be further dried. Gas and solid two phases rotary flow, inertia of solid phase is bigger than gas phase, the relative velocity between gas phase and solid phase is high, heat exchanging efficiency is strengthened, so the drying intensity of this machine is high.
| No | Item (XSG-10) | Data |
| 1 | moisture evaporation amount | 400kg/h |
| 2 | inner diameter(mm) | 1000 |
| 3 | air volume(m³/h) | 12000 |
| 4 | Install power(kw) | 75 |
| 5 | Max height(m) | 6.5 |
| 6 | Occupied area(㎡) | 45 |
1. Several feeding device can be chose, feeding is continuous andstable, no phenomenon of bridging.
2. There is special cooling device at the bottom of dryer, it canavoid the material that in the bottom high temperature area be bad.
3. There is special air sealing device and cooling device for bearing,it can make the life of transmission part longer effectively.
4. There is special air distributing device, it can reduce theresistance of equipment, and make the air speed in drying towerbecome balance.
5. There is classify ring and turbojet plate, the fineness and finalmoisture of product can be adjusted and controlled.6.Circumference air speed in the drying tower is high, theresidence time of material is short, it can avoid the material stick onthe wall and thermal sensitive materials go bad.
