Changzhou Shinma Drying Engineering Co.,LTD.
Changzhou Shinma Drying Engineering Co.,LTD.
Add to Cart
Working Principle:
After been filtered and heated the air enters into the air distributor on the top of the dryer. The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting the heat air, the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
PRODUCT SPECIFICATIONS
| No | Item | Data |
| 1 | moisture evaporation amount | 50kg/h |
| 2 | operation temputure | input air140~220℃,output air 80-100℃ |
| 3 | Tower outer diameter / tower net height | 3m/7m |
| 4 | Atomizer speed | 18000r.p.m |
| 5 | Atomization type | Centrifugal atomization |
| 6 | Heating source | steam/gas+electricity |
| 7 | Product collection method | First stage cyclone + second stage+water film dust removal |
Main Features:
1. The drying speed is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow, 95~98% of water can be evaporated at a moment. The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.